Reference: A-XF12V8
Set for locking the camshaft and crankshaft when changing the timing belt. Ability to set the timing to the correct position.
Reference: S-419RA
Widely used not only for automobile repair, daily fastening and hydraulic applications, but also for various applications such as motorcycles, construction machinery and electrical equipment.
Reference: 3286-1
- Diameter : 75 mm. - Maximum speed: 20,000 RPM - Suitable for mini pneumatic cutters. - Thickness 1.8 mm
Reference: 8156-2
Crankshaft locking pin Ford 1.8 D/TD/TDdi/TDCi 2.5 Di-Turbo/TCi
Reference: 10402
PSA's 1.0 and 1.2 Puretech engines use "weltbelt" or wet belt technology where the belt is always in contact with the engine oil. This tool allows you to quickly measure any degradation of the belt.
Reference: F0315
• Joint former based on Acetic Silicone. • High adhesion on non-porous metals. • Resistant up to 315°C. • BLACK color.
Reference: 144309636
Impact and scratch resistant polycarbonate lens. Design for maximum visibility and UV protection. Ideal for jobs with poor visibility. Compliant with EN166.
Reference: 9460
Essential lubricant to always have tools in good working order
Reference: 4874
Made of high performance S2 steel alloy Anchor: 10 mm. Length: 30 mm. Finish: Gray steel Measurement: T50
Reference: 207001
Black insulating tape, made of PVC, resistant to voltage, heat and different acids and alkalines, it is mainly used for electrical insulation, in the automobile, in the electronics and DIY industry. Insulating tape 20 meters long and 19mm wide.
Reference: 9670
The pin allows the pump to be blocked when it is required to be uninstalled or installed, thus avoiding losing its correct adjustment.
Reference: 5184-TS25
1/4" socket wrench with 5-point Tamper-proof Torx tip for Tamper-proof 5-point Torx female screws. Made of hardened and tempered chrome-vanadium steel for greater corrosion resistance. Chrome-plated socket with satin effect and knurled ring for greater grip. Socket square: 1/4" Measurement: TS25. ( Special flowmeters ).
Banner
Disassembly and unlocking tools for difficult to open cable couplings, for opening cable couplings in air conditioning, fuel and air systems, as well as hydraulic lines
Reference: 1684
Suitable for servicing cooling fans on BMW, Ford and GM vehicles, plus other brands.
Reference: 8714
Wide range of applications , e.g. suitable for air conditioning , food processing, heating and ventilation, agriculture , automobile, photography, food storage, refrigeration, laboratories , etc.
Reference: 7231
Kit to test the pressure cooling circuit, with an updated selection of adapters for European and Japanese vehicles, including Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia,
Reference: S-8WPT15
for testing the operation of mechanically driven cooling water pumps with the engine running Helps identify pump failures caused by damaged pump wheels, locked pump wheel shaft or slipping drive belts
Reference: 1774
Specially designed wrench to allow the technician to easily access the thermo-viscous fan clutch hex coupler
Reference: A-3FLEX1
Made of composite fiberglass, special for holding cooling hoses, brake and fuel pipes. For diameters up to 10, 15 and 24 mm and at a 90º angle for hard-to-reach areas.
Reference: 1820
Suitable for all ethylene and glycol solutions, works with hot and cold liquids, allows visual control of the liquid, whether it contains traces of rust or dirt.
Reference: 1683
To move the water pump on Opel and GM to tension the drive belt on OHC engines
Reference: 1772
Specially designed wrench to allow the technician to easily access the thermo-viscous fan clutch hex coupler
Reference: S-27PT
With this kit it is possible to check the tightness of the entire cooling circuit in most vehicles, as it comes with a wide range of adapters.
Reference: 13350708
Set of three fluid blockers, suitable for holding and closing flared metal pipes in brake systems, cooling systems, fuel pipes, A/C pipes, etc.
Reference: 427656
To check the status of the ethylene glycol antifreeze fluid. Indicator with 6 colored floating discs. Easy-to-read level, sturdy glass body. 7°C to -37°C
Reference: A-9004G
Suitable for oil and antifreeze fluid changes, anti-splash lip that contains the fluid when transporting or pouring.
Reference: 9939
Robust construction material: HDPE -Multiple uses for brake fluids, battery fluids and non-acidic fluids - Includes flexible mouthpiece and lockable lid - With threaded nozzle - Color: white/transparent - Filling capacity: 2 l
Reference: 8347
Pliers for removing and installing click-L hose clamps, hardened jaws and chrome-plated handle.
Reference: 9525
Complete set of clamp pliers with heavy duty construction with locking ratchet mechanism on some pliers . Vinyl handles for greater comfort.
Disassembly and unlocking tools for difficult to open cable couplings, for opening cable couplings in air conditioning, fuel and air systems, as well as hydraulic lines
