Reference: A-XF12V8
Set for locking the camshaft and crankshaft when changing the timing belt. Ability to set the timing to the correct position.
Reference: S-419RA
Widely used not only for automobile repair, daily fastening and hydraulic applications, but also for various applications such as motorcycles, construction machinery and electrical equipment.
Reference: 3286-1
- Diameter : 75 mm. - Maximum speed: 20,000 RPM - Suitable for mini pneumatic cutters. - Thickness 1.8 mm
Reference: 8156-2
Crankshaft locking pin Ford 1.8 D/TD/TDdi/TDCi 2.5 Di-Turbo/TCi
Reference: 10402
PSA's 1.0 and 1.2 Puretech engines use "weltbelt" or wet belt technology where the belt is always in contact with the engine oil. This tool allows you to quickly measure any degradation of the belt.
Reference: F0315
• Joint former based on Acetic Silicone. • High adhesion on non-porous metals. • Resistant up to 315°C. • BLACK color.
Reference: 144309636
Impact and scratch resistant polycarbonate lens. Design for maximum visibility and UV protection. Ideal for jobs with poor visibility. Compliant with EN166.
Reference: 9460
Essential lubricant to always have tools in good working order
Reference: 4874
Made of high performance S2 steel alloy Anchor: 10 mm. Length: 30 mm. Finish: Gray steel Measurement: T50
Reference: 207001
Black insulating tape, made of PVC, resistant to voltage, heat and different acids and alkalines, it is mainly used for electrical insulation, in the automobile, in the electronics and DIY industry. Insulating tape 20 meters long and 19mm wide.
Reference: 9670
The pin allows the pump to be blocked when it is required to be uninstalled or installed, thus avoiding losing its correct adjustment.
Reference: 5184-TS25
1/4" socket wrench with 5-point Tamper-proof Torx tip for Tamper-proof 5-point Torx female screws. Made of hardened and tempered chrome-vanadium steel for greater corrosion resistance. Chrome-plated socket with satin effect and knurled ring for greater grip. Socket square: 1/4" Measurement: TS25. ( Special flowmeters ).
Banner
Reference: 2040-2.5
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
Reference: 2040-8.5
ground drill bits 135° tips with cross sharpening
Reference: 2040-10
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
Reference: 2040-9.5
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
Reference: 2040-2
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
Reference: 50310
Suitable for drilling in wood, plasterboard and chipboard. - Hole saw sizes: Ø 32 - 38 - 51 - 54 mm - Centering hole diameter: 6 mm - Max. Cutting depth: 24mm
Reference: 2040-9
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
Reference: 2040-7.5
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
Reference: 2010
High quality HSS drill bits designed to reduce friction and heat. Ideal for use on high carbon steels, copper and plastics. Supplied in a metal box. Measurements: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5,10 mm.
Reference: S-SDS6
Can be drilled without pre-drilling (no need for a starter hole). Without sticking chips to the drill bit. There are no sharp angles left. Widely used for cutting holes in a variety of materials such as steel, wood, thin iron, aluminum alloy, insulation boards, PVC sheets, etc. Manufactured from HSS4241 steel for performance and durability.
Reference: 2040-6.5
ground drill bits 135° tips with cross sharpening
Reference: 2013
TIN coated surface laminate 0.5mm ascending right hand cut suitable in steel, cast steel and high and low alloy steel
Reference: 2040-5.5
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
Reference: 2040-5
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
Reference: 2040-1
Up to 600% more durable than normal HSS drill bits, suitable for drilling special alloys, Cr-Ni steels, Nirosta, V4A, welds, etc.
