Reference: A-XF12V8
Set for locking the camshaft and crankshaft when changing the timing belt. Ability to set the timing to the correct position.
Reference: S-419RA
Widely used not only for automobile repair, daily fastening and hydraulic applications, but also for various applications such as motorcycles, construction machinery and electrical equipment.
Reference: 3286-1
- Diameter : 75 mm. - Maximum speed: 20,000 RPM - Suitable for mini pneumatic cutters. - Thickness 1.8 mm
Reference: 8156-2
Crankshaft locking pin Ford 1.8 D/TD/TDdi/TDCi 2.5 Di-Turbo/TCi
Reference: 10402
PSA's 1.0 and 1.2 Puretech engines use "weltbelt" or wet belt technology where the belt is always in contact with the engine oil. This tool allows you to quickly measure any degradation of the belt.
Reference: F0315
• Joint former based on Acetic Silicone. • High adhesion on non-porous metals. • Resistant up to 315°C. • BLACK color.
Reference: 144309636
Impact and scratch resistant polycarbonate lens. Design for maximum visibility and UV protection. Ideal for jobs with poor visibility. Compliant with EN166.
Reference: 9460
Essential lubricant to always have tools in good working order
Reference: 4874
Made of high performance S2 steel alloy Anchor: 10 mm. Length: 30 mm. Finish: Gray steel Measurement: T50
Reference: 207001
Black insulating tape, made of PVC, resistant to voltage, heat and different acids and alkalines, it is mainly used for electrical insulation, in the automobile, in the electronics and DIY industry. Insulating tape 20 meters long and 19mm wide.
Reference: 9670
The pin allows the pump to be blocked when it is required to be uninstalled or installed, thus avoiding losing its correct adjustment.
Reference: 5184-TS25
1/4" socket wrench with 5-point Tamper-proof Torx tip for Tamper-proof 5-point Torx female screws. Made of hardened and tempered chrome-vanadium steel for greater corrosion resistance. Chrome-plated socket with satin effect and knurled ring for greater grip. Socket square: 1/4" Measurement: TS25. ( Special flowmeters ).
Banner
Measures:
– From 9 to 12 mm, for 12 mm ratchet or wrench
– From 12 to 16 mm, for 14 mm ratchet or wrench
– From 16 to 22 mm, for 19 mm ratchet or wrench
– From 22 to 36 mm, for 22 mm ratchet or wrench
A briefcase of wrenches that allow you to break all types of nuts.
By breaking them, we eliminate the problem and we can replace it.
The small adapter allows nuts with a caliber less than 9 mm to be inserted.
When tightening the tool with a flat wrench or socket, we apply pressure until the screw or nut breaks.
Pack contents: 9 to 12 mm nut breaking wrench, for 12 mm ratchet or wrench 12 to 16 mm nut breaking wrench, for 14 mm ratchet or wrench Nut breaking wrench 16 to 22 mm, for 19 mm ratchet or wrench Wrench nut splitter from 22 to 36 mm, for 22 mm ratchet or wrench
Reference: S-SE10CD
A set of left-handed drills and extractors for removing broken screws, asparagus, mechanized screws or pipe connectors with right thread. · The drills are made of high speed steel HSS 4241. · Extractors have a spiral groove that automatically penetrates deeper into the screw when unscrewed. · The set includes 5 drills and 5...
Reference: 8576
The extractor fits any stud between 6 and 12 mm. It works perfectly with broken, threaded or very damaged studs. - Allows quick disassembly and assembly of studs - 36mm 6-pt chuck. - 24 mm square. or 1/2"
Reference: 8462
Allows professional removal of broken screws and studs Reduce time and costs HSS steel
Reference: 8799
• Robust tool, rough and hardened turning wheel • Provides gripping power through the use of an eccentric splined wheel • Ideal for removing rusty or damaged screws. • 6.5mm - 19mm capacity. • 1/2 "square
Reference: 5266-19
To loosen damaged nuts and bolt heads Its innovative spiral profile inside the head allows you to safely remove damaged screws and hex nuts that would otherwise be unusable.
Reference: 5266-17
To loosen damaged nuts and bolt heads Its innovative spiral profile inside the head allows you to safely remove damaged screws and hex nuts that would otherwise be unusable.
Reference: 5269-21
To loosen damaged nuts and bolt heads Its innovative spiral profile inside the head allows you to safely remove damaged screws and hex nuts that would otherwise be unusable.
Reference: 1896
For removing broken screws, suitable for following screws: 3 - 6mm (1/8" - 1/4"), 6 - 8mm (1/4" - 5/16"), 8 - 11mm (5/16" - 7/16"), 11 - 14mm (7/16" - 9/16"), 14 - 19mm (9/16" - 3/4"), 19 - 25mm (3/4" - 1"). - Carbon Steel - In plastic box
Reference: 9724
· Useful stud extractor measuring 6 to 12mm · Valid to work with a pneumatic gun. · Manufacture of the gripping jaws by pressure, which guarantees a perfect grip. · Stud grip with only 2mm of surface. · System that allows you to grab nuts, studs, screws and even engine bolts or pins
Reference: S-TSN11SH
A set of sockets for unscrewing damaged bolts and nuts. The special shape of the inside of the cap allows you to bite into the head of the damaged bolt or nut to remove it. The external structure of the socket allows the use of a combination wrench or hexagonal socket. The special low-profile design allows you to work in hard-to-reach places.
Reference: 6780
To remove broken studs and right-hand thread screws
Reference: 9533
Contains: 11 pieces Sizes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 and 19 mm. For removing damaged, rounded and broken wheel nuts or lug nuts. Presented in a neat storage box.
Reference: S-TS11X
Specifically for loosening tight bolts, lug nuts and wheel bolts that cannot be removed with normal tools
Reference: S-TS10SH
Set for loosening damaged screws and nuts, the innovative spiral profile embeds itself in the head of the damaged screws and nuts and allows them to be released safely.
Reference: 5260
to loosen badly damaged nuts especially suitable for wheel nuts, lock nuts, etc. sizes 17 - 18.5 - 21.5 - 26 mm in metal box
Reference: 5268-22
To loosen damaged nuts and bolt heads Its innovative spiral profile inside the head allows you to safely remove damaged screws and hex nuts that would otherwise be unusable.
Measures:
– From 9 to 12 mm, for 12 mm ratchet or wrench
– From 12 to 16 mm, for 14 mm ratchet or wrench
– From 16 to 22 mm, for 19 mm ratchet or wrench
– From 22 to 36 mm, for 22 mm ratchet or wrench
