Reference: A-XF12V8
Set for locking the camshaft and crankshaft when changing the timing belt. Ability to set the timing to the correct position.
Reference: S-419RA
Widely used not only for automobile repair, daily fastening and hydraulic applications, but also for various applications such as motorcycles, construction machinery and electrical equipment.
Reference: 3286-1
- Diameter : 75 mm. - Maximum speed: 20,000 RPM - Suitable for mini pneumatic cutters. - Thickness 1.8 mm
Reference: 8156-2
Crankshaft locking pin Ford 1.8 D/TD/TDdi/TDCi 2.5 Di-Turbo/TCi
Reference: 10402
PSA's 1.0 and 1.2 Puretech engines use "weltbelt" or wet belt technology where the belt is always in contact with the engine oil. This tool allows you to quickly measure any degradation of the belt.
Reference: F0315
• Joint former based on Acetic Silicone. • High adhesion on non-porous metals. • Resistant up to 315°C. • BLACK color.
Reference: 144309636
Impact and scratch resistant polycarbonate lens. Design for maximum visibility and UV protection. Ideal for jobs with poor visibility. Compliant with EN166.
Reference: 9460
Essential lubricant to always have tools in good working order
Reference: 4874
Made of high performance S2 steel alloy Anchor: 10 mm. Length: 30 mm. Finish: Gray steel Measurement: T50
Reference: 207001
Black insulating tape, made of PVC, resistant to voltage, heat and different acids and alkalines, it is mainly used for electrical insulation, in the automobile, in the electronics and DIY industry. Insulating tape 20 meters long and 19mm wide.
Reference: 9670
The pin allows the pump to be blocked when it is required to be uninstalled or installed, thus avoiding losing its correct adjustment.
Reference: 5184-TS25
1/4" socket wrench with 5-point Tamper-proof Torx tip for Tamper-proof 5-point Torx female screws. Made of hardened and tempered chrome-vanadium steel for greater corrosion resistance. Chrome-plated socket with satin effect and knurled ring for greater grip. Socket square: 1/4" Measurement: TS25. ( Special flowmeters ).
Banner
There are 7 products.
Active filters
Reference: 7231
Kit to test the pressure cooling circuit, with an updated selection of adapters for European and Japanese vehicles, including Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia,
Reference: 9474
Designed to charge the turbo system with a regulated low air pressure , to show the presence of leaks in the system. Supplied with four pairs of stepped adapters to fit most hose sizes . It has a pressure gauge, shut-off valve and pressure release valve . It can also be used on cooling system hoses .
Reference: 62646
Designed to detect a wide variety of engine faults including: worn piston rings, worn valves, cracks and blown head gaskets. Measures the % of cylinder leaks and the
Reference: CT4861
allows measurement of exhaust gas backpressure fits the thread of the Lambda probe of the exhaust system or the flange of the exhaust gas recirculation valve (EGR / AGR) allows conclusions to be drawn about obstruction or constriction, e.g. of clogged catalysts or particulate filters, thus avoiding costly repair costs due to damage to the turbocharger
Reference: S-27PT
With this kit it is possible to check the tightness of the entire cooling circuit in most vehicles, as it comes with a wide range of adapters.
Reference: A-1025B
Easily and quickly diagnoses cracked gaskets, blocks and cylinder heads, indicating the presence of CO2 in the cooling system by the change in color of the liquid.
Reference: 7230
Easily and quickly diagnoses cracked gaskets, blocks and cylinder heads, indicating the presence of CO2 in the cooling system by the change in color of the liquid.
