Reference: A-XF12V8
Set for locking the camshaft and crankshaft when changing the timing belt. Ability to set the timing to the correct position.
Reference: S-419RA
Widely used not only for automobile repair, daily fastening and hydraulic applications, but also for various applications such as motorcycles, construction machinery and electrical equipment.
Reference: 3286-1
- Diameter : 75 mm. - Maximum speed: 20,000 RPM - Suitable for mini pneumatic cutters. - Thickness 1.8 mm
Reference: 8156-2
Crankshaft locking pin Ford 1.8 D/TD/TDdi/TDCi 2.5 Di-Turbo/TCi
Reference: 10402
PSA's 1.0 and 1.2 Puretech engines use "weltbelt" or wet belt technology where the belt is always in contact with the engine oil. This tool allows you to quickly measure any degradation of the belt.
Reference: F0315
• Joint former based on Acetic Silicone. • High adhesion on non-porous metals. • Resistant up to 315°C. • BLACK color.
Reference: 144309636
Impact and scratch resistant polycarbonate lens. Design for maximum visibility and UV protection. Ideal for jobs with poor visibility. Compliant with EN166.
Reference: 9460
Essential lubricant to always have tools in good working order
Reference: 4874
Made of high performance S2 steel alloy Anchor: 10 mm. Length: 30 mm. Finish: Gray steel Measurement: T50
Reference: 207001
Black insulating tape, made of PVC, resistant to voltage, heat and different acids and alkalines, it is mainly used for electrical insulation, in the automobile, in the electronics and DIY industry. Insulating tape 20 meters long and 19mm wide.
Reference: 9670
The pin allows the pump to be blocked when it is required to be uninstalled or installed, thus avoiding losing its correct adjustment.
Reference: 5184-TS25
1/4" socket wrench with 5-point Tamper-proof Torx tip for Tamper-proof 5-point Torx female screws. Made of hardened and tempered chrome-vanadium steel for greater corrosion resistance. Chrome-plated socket with satin effect and knurled ring for greater grip. Socket square: 1/4" Measurement: TS25. ( Special flowmeters ).
Banner
There are 18 products.
Active filters
Reference: A-12003
Set of 3 1/2" pentagonal sockets suitable for the adjustment and installation of Bendix and Girling brakes. Made of chrome-vanadium steel.
Reference: A-12003UPG
Cups with pentagonal profile for use with BENDIX and GIRLING brakes. Content: - 1 piece. socket with 10mm tip universal use for vehicles with GIRLING brake system - 1 pc. 5 point socket wrench. 10 mm universal applicable to most passenger cars - 1 pc. 5 point socket wrench. Brake caliper disassembly 12.5 mm Peugeot, Citroen - 1 pc. 5 point socket wrench....
Reference: 13350400
Quick and effective method of repairing brake caliper threads using M9 x 1.25mm inserts .
Reference: 148-1
Delivery content: 1 threaded insert with appropriate copper gasket M9 x 1.25
Reference: 9418
Brake cylinder lapper, flexible and adjustable drive shaft. Stone Length 28 mm. with adjustable capacity from Ø19-56 mm. Suitable for small brake cylinders.
Reference: 8929
Used on radially mounted brake calipers to allow safe replacement of brake pads while reducing the risk of the caliper striking and damaging ceramic brake discs
Reference: 4996
- to loosen or tighten the caliper bolts of the rear brake of the Audi A4, A6, A8 - very low profile: 24 mm - 3/8 "
Reference: 4995
- to loosen or tighten the caliper bolts of the rear brake of the Mercedes C -Class - very low profile: 24 mm - 3/8 "
Reference: 9898
necessary during the renewal of brake linings Suitable for 6-piston brake caliper on Porsche, VW Touareg, Audi Q7 size 9 mm 10 sides entry 10 mm (3/8")
Reference: 6706
To loosen and tighten the front axle brake calipers
Reference: A-10BCS
To loosen and tighten the brake caliper thread on the brake caliper bracket
Reference: A-SC10T-15
To loosen and tighten the brake caliper threaded connection on the brake caliper bracket, suitable for Audi Q7, S8, Porsche Macan, Cayenne and Cayman
Reference: 10753
14mm 7-point socket specific for use on brake caliper bolts in Audi models from 2.017. Applications: AUDI A5, A6L, Q5, Q7, S4 , etc. 7 point profile. Size: 1/2" D x 14mm x 50mm long. Made of Chrome Molybdenum with black phosphate finish.
Reference: A-7PBC
Specialized 1/2” x 7 point socket ideal for replacing brake pads/calipers on Audi S5 and Q5 cars.
Reference: A-SC10T-20
1/2” socket, size 11.5 mm, 10 points, 50 mm long, adapted to the brake caliper fork bolts on VW, Audi and Porsche cars Square Screw size (mm) diameter (mm) length(mm) Weight (grams) 1/2" twenty 26 fifty 106
Reference: A-P910PT
Necessary during the renewal of brake linings Suitable for 6-piston brake caliper on Porsche, VW Touareg, Audi Q7 size 9 mm 10 sides entry 10 mm (3/8")
Reference: A-14BC7
14 mm 7 point glass specifically for use in brake caliper bolts on Audi models from 2.017. Applications include: AUDI A5, A6L, Q5, ?? Q7, S4, etc. Profile of seven points. Size: 1/2" D x 14 mm x 50 mm in length. Made of chromium molybdenum with black phosphate finish.
