Reference: A-XF12V8
Set for locking the camshaft and crankshaft when changing the timing belt. Ability to set the timing to the correct position.
Reference: S-419RA
Widely used not only for automobile repair, daily fastening and hydraulic applications, but also for various applications such as motorcycles, construction machinery and electrical equipment.
Reference: 3286-1
- Diameter : 75 mm. - Maximum speed: 20,000 RPM - Suitable for mini pneumatic cutters. - Thickness 1.8 mm
Reference: 8156-2
Crankshaft locking pin Ford 1.8 D/TD/TDdi/TDCi 2.5 Di-Turbo/TCi
Reference: 10402
PSA's 1.0 and 1.2 Puretech engines use "weltbelt" or wet belt technology where the belt is always in contact with the engine oil. This tool allows you to quickly measure any degradation of the belt.
Reference: F0315
• Joint former based on Acetic Silicone. • High adhesion on non-porous metals. • Resistant up to 315°C. • BLACK color.
Reference: 144309636
Impact and scratch resistant polycarbonate lens. Design for maximum visibility and UV protection. Ideal for jobs with poor visibility. Compliant with EN166.
Reference: 9460
Essential lubricant to always have tools in good working order
Reference: 4874
Made of high performance S2 steel alloy Anchor: 10 mm. Length: 30 mm. Finish: Gray steel Measurement: T50
Reference: 207001
Black insulating tape, made of PVC, resistant to voltage, heat and different acids and alkalines, it is mainly used for electrical insulation, in the automobile, in the electronics and DIY industry. Insulating tape 20 meters long and 19mm wide.
Reference: 9670
The pin allows the pump to be blocked when it is required to be uninstalled or installed, thus avoiding losing its correct adjustment.
Reference: 5184-TS25
1/4" socket wrench with 5-point Tamper-proof Torx tip for Tamper-proof 5-point Torx female screws. Made of hardened and tempered chrome-vanadium steel for greater corrosion resistance. Chrome-plated socket with satin effect and knurled ring for greater grip. Socket square: 1/4" Measurement: TS25. ( Special flowmeters ).
Banner
There are 8 products.
Active filters
Reference: 1064
Distribution timing set for Brava, Bravo 1.4 12v V with engine code 182 A3.000, 182 A5.000
Reference: 9521063
Fiat 1.6 12V, 16V engine distribution tune-up kit Brava, Bravo, Coupe, Marea, Tipo, Stilo, Lancia Delta, Libra.
Reference: S-O13CD
Basic tool kit for timing the camshaft and crankshaft of 1.3CDTI engines used in a wide range of Opel brand models. It is also used in models from the Citroën, Ford, Fiat, Peugeot and Suzuki brands.
Reference: S-BFF13
This range of 1.3 16v diesel engines , used by a large number of vehicle manufacturers , are all double overhead cam , common rail diesel engines.
Reference: 9139
The Kit consists of a camshaft adjustment plate , crankshaft locking tool and belt tensioner adjustment for the 1.2 engine. Additional sprocket locking tool and alignment device for the camshaft sensor on the 1.4 VVT engine.
Reference: S-09TAC
This tool set has been designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the low emission, high economy Fiat twin cylinder engine.
Reference: A-XBT12
Suitable for loosening the timing belt tensioner. Hassle-free replacement of the belt, due to the small size of the key allows operation in hard-to-reach places. For use in: • Fiat: 500, Albea, Bravo, Brava, Grande Punto, MArea, Marengo, Palio, Ritmo, Siena, Estilo, Idea (1997-2007) • Lancia: Ypsilon, Delta, Musa • Alfa Romeo: Giulietta, MiTo ENGINES •...
Reference: 8148
Toolkit for belt replacement and engine repair in Fiat, Alfa Romeo and Lancia Fiat: Brava/Bravo, Barchetta, Cargo, Coupe, Double, Ducato, Idea, Marea/Weekend, Multi-pla, Palio/Weekend, Punto, Scudo, Stilo, Type, Tempra and Ulysse are also available This is Alfa Romeo: 145, 146, 147, 155, 156, Spider and GTV He throws: Delta, Ulysse and Ypsillon Other:...
